Easy Connect Plug and Play Vacuum Press Kit

Easy Connect - AVCS Plug & Play Product

by HD Industrial Design September 19, 2014

Kit options: 

Pump - Press
Go directly from your pump to the HD press. Ideal for small production.
Includes: 6ft tubing, 2 - 1/2" NPT Elbows, 1 - 3/8" NPT Elbow, 2 - 1/2" Elbows 

Please note the kits below are only needed for the first version of the Automated Vacuum Controller (as seen in the video below). Our newest version of the Vacuum Control System has integrated the ports for additional pumps. You may need extra tubing, but you won't need the kits below.

Pump - HD-AVCS-100 - 1 Press
Go from your pump to the HD Automated Vacuum Control System 100 to one HD Press. Perfect for the savvy hobbyist or the startup holster maker.
Includes: 12ft hose, 4 - 1/2" NPT Elbows, 1 - 3/8" NPT Elbow, 4 - 1/2" Elbows 

Pump - HD-AVCS-100 - 2 Presses
Go from your pump to the HD Automated Vacuum Control System 100 to two HD Presses. Great for the busy holster maker.
Includes: 16ft hose, 5 - 1/2" NPT Elbows, 1 - 3/8" NPT Elbow, 5 - 1/2" Elbows, 1 - Double outlet port, 1 - plug

Pump - HD-AVCS-100 - 3 Press
Go from your pump to the HD Automated Vacuum Control System 100 to three HD Presses. Optimal for large scale production.
Includes: 20ft hose, 6 - 1/2" NPT Elbows, 1 - 3/8" NPT Elbow, 6 - 1/2" Elbows, 1 - Triple outlet port, 2 - plugs

Easy Connect Kit - Plug and Play 




HD Industrial Design
HD Industrial Design

Author




Also in Vacuum Forming Tips & Tricks

Gen I Automated Vacuum Controller HD Press
The HD AVCS DIY Build Configuration

by HD Industrial Design March 23, 2020

The HD Automated Vacuum Control System is a plug & play setup. It comes preassembled. All you need to do is hook it up to your vacuum pump, connect it to your press, and go!

Read More

Troubleshooting Leaks Tips & Tricks
Troubleshooting Leaks Tips & Tricks

by Jennifer Oden June 28, 2018

In the unlikely event that your HD vacuum press is not holding vacuum, we go over common leak causes and solutions to get your press back up and running like it should!

Read More

Heatsink Tips & Tricks - Purpose & Usage
Heatsink Tips & Tricks - Purpose Of Heat Sink - Function Of Heat Sink - Usage Tips

by Jennifer Oden June 20, 2018

How do I properly prepare the heatsink for my molds? Let's discuss the best options for getting your heatsink setup and optimized for your vacuum forming needs.

Read More