Closing Business - get supplies

Closing Business - get supplies

by Jennifer Oden February 17, 2021

We have made the decision to retire and close down HD Industrial Design. We thank you all for your valued loyalty and the hard earned money you spent with us. We will no longer be supporting any of our products (as they are outside the warranty period) and will only offer our remaining inventory for sale (membrane, heatsink, tubing, fittings, and curved jigs/foam) and once that is gone thats it, we will not be restocking these items. We will update this page with replacement part information as items sell out.

Membrane: Here are the details on how to get replacement membrane going forward. You will have to buy linear feet and cut to press size, there are two options for purchasing.

  • Bulk by the 50ft roll: If you are interested in buying bulk direct from the silicone manufacturer, 50ft roll minimum order required and pricing will vary greatly based on the quantity ordered - must apply for a quote from manufacturer. Manufacturer - https://viprubber.com/ (this is not a retail seller, so you will have to go through their process to purchase direct) Silicone specs to order: VIP PART ID: 23380 - .032"THICK +/-.012" X 49"WIDE X 50 FT LONG, USEABLE TALC FREE, PAPER LINER GRAY 60 DUROMETER COMMERCIAL SILICONE ROHS AND REACH COMPLIANT
  • By the foot (easier option): If you don’t want to go through that process and would rather order by the linear foot from a retailer www.knifekits.com is going to start supplying it by the foot soon. Send inquiries to sales@knifekits.com or call sales 1-877-255-6433. They are working on getting this in stock and will eventually be available on their website, but until then you can call or email them to get started.



Jennifer Oden
Jennifer Oden

Author




Also in Vacuum Forming Tips & Tricks

Gen I Automated Vacuum Controller HD Press
The HD AVCS DIY Build Configuration

by HD Industrial Design March 23, 2020

The HD Automated Vacuum Control System is a plug & play setup. It comes preassembled. All you need to do is hook it up to your vacuum pump, connect it to your press, and go!

Read More

Troubleshooting Leaks Tips & Tricks
Troubleshooting Leaks Tips & Tricks

by Jennifer Oden June 28, 2018

In the unlikely event that your HD vacuum press is not holding vacuum, we go over common leak causes and solutions to get your press back up and running like it should!

Read More

Heatsink Tips & Tricks - Purpose & Usage
Heatsink Tips & Tricks - Purpose Of Heat Sink - Function Of Heat Sink - Usage Tips

by Jennifer Oden June 20, 2018

How do I properly prepare the heatsink for my molds? Let's discuss the best options for getting your heatsink setup and optimized for your vacuum forming needs.

Read More