How To Guides
DIY Vacuum Pump Vapor Mist Solution
Here is a quick demo of what we did to eliminate the oil vapor most vacuum pumps emit during use. This is demonstrated on a 8CFM Vacuum Pump model.
How to choose the right Vacuum Pump
Don't know what vacuum pump to get for your HD Press? We came up with a list of what is important and the best options we think you would want to consider.
How to Recover Your HD Foam
Your HD foam can be reset to close to 90% of its original shape by heating it in the oven at 180°F for 20 minutes and then letting it air cool.
How to Split a Blue Gun - DIY Guide
How to split a blue gun for use in vacuum forming kydex holsters. Video tutorial and step by step guide for the best way to make your own split molds.
How to Make a Kydex Holster - Making a Taco Holster
With a little creativity you can do just about anything with the HD Vacuum Former Press including a traditional taco press. We are demonstrating the taco press using foam.
Troubleshooting Leaks Tips & Tricks
In the unlikely event that your HD vacuum press is not holding vacuum, we go over common leak causes and solutions to get your press back up and running like it should!
Heatsink Tips & Tricks - Purpose Of Heat Sink - Function Of Heat Sink - Usage Tips
How do I properly prepare the heatsink for my molds? Let's discuss the best options for getting your heatsink setup and optimized for your vacuum forming needs.
Membrane Tips & Tricks - Cleaning Vacuum Former Membrane - Reduce static
What is the best way to get rid of static buildup and optimize your vacuum forming membrane for the best vacuum seal possible? Lets go over some easy ways clean it and reduce static!