Easy Connect Vacuum Pump Conversion Kit
HD-EZC-PAVCS
21$ 29.99
No Hassle Vacuum Pump Conversion Kit! Easily convert your vacuum pump to work with the HD Automated Vacuum Control System. If you haven't already purchased a HD Vacuum Press (which includes these parts), get your conversion kit now to use the automated controller with any press. Easy connect uses a special release collar for easy removal of tubing. All you have to do is push on the outer lip and your tubing will release allowing for quick and easy adjustments.
- Accepts nylon and polyurethane tubes
- Easy installation in confined spaces
- Release collar allows easy removal of tubing without damaging the tube
- Can be used for a wide range of pressures from a low vacuum up to a pressure of 30 InHG
Includes:
- 6ft tubing
- 1 - 1/2" NPT Elbow
- 1 - 3/8" NPT Elbow
I have to say HD Idustrial puts out some top notch products. Thanks.
Everything works great
Have not hooked it all up yet, but parts are great quality and packed well.
Great Kit easy to use and had my press up and running in about 5 - 10 minutes.
Works as advertised and Victor is very helpful!
Awesome kit
This really makes for a good clean set up without vacuum leaks.
Made the install so very easy. And my HD 200 is FANTASTIC. The definition is fantastic.
Kit was easy and quick to install great product!!
Easy setup and great results.
Hi the easy connect I had a problem with one of the brass fittings thread pattern I ordered the robinair 15310 vacum pump as you suggested and the vacum pump thread connect in the kit for that pump did not work correctly it started to strip the thread on the pump itself it has a different thread pattern I wound up using the threaded push connect that came with the machine to connect the hose the other fittings on the vacum former we're fine just one of push connects to go to the vacum pump were not right it still works just can't use the push on hose connect to vacum pump it is a fine thread and the other fittings are more of a coarse thread the fitting is the smaller one that came with the kit
Excellent! EZ set up and after just a few mins, my HD200 vacuum press was up and Running. Thanks
Great product, fast shipping.
Save yourself the time and headache. If you're not familiar with these pneumatic fittings, just buy the kit. Sure you can piece stuff elsewhere, but these are ready to go.
The easy connect pump to press kit, and HD-200 vacuum press are excellent upgrades to Kydex making. I would highly recommend to anyone wanting to produce professional holsters.
Great product and easy set up!
Awesome press
Works great
Great kit works great with my HD Press
Simple efficient and easy to hook up. I was very happy with it.
Q: What is the PSI rating and the burst strength rating of this poly tubing? Also, what is the OD accuracy (1/2" +/- what?).
A: Diameter Tolerance - ±.004”. Vacuum Rating - All. Temperature Range -40˚F to +150˚F. Working Pressure 3:1 Safety Factor (135 PSI 75˚F - 55 PSI 150˚F).
The HD AVCS DIY Build Configuration
Troubleshooting Leaks Tips & Tricks
