$ 199.99 $ 249.99
Is your production as efficient as it could be? You can extend the life of your vacuum pump, cut down on excessive noise and power usage, and streamline your vacuum forming process.
The automated vacuum control system can automatically cycle one pump to operate up to three vacuum presses. Right out of the box you can streamline your production, maximize your time, cut costs, and take your business to the next level.
Click here to download - Instruction Manual
3 CFM or higher vacuum pump is required to operate. If you haven't purchased an HD Vacuum Former, make sure you get a Vacuum Pump Conversion Kit to change the fittings on your pump to be compatible. All HD Vacuum Former Presses come with this kit. Kit not required if you purchase one of the pre-converted pumps below from us.
Easy Connect Converted Vacuum pumps ready for this system:
Get your vacuum pump controller today!
Q: Does this system come with the hose connections or is it sold separately?
A: If you have not purchased an HD Vacuum Press, you will need to purchase a Vacuum Pump Conversion Kit separately to get the fittings needed convert your pump to the compatible fittings. All HD Vacuum Presses include the neccesary fittings needed to convert a vacuum pump to easy connect.
Q: What would be the benefits of running this on a single press?
A: The Automated Vacuum Control System streamlines any operation regardless of the number of presses you are operating. It allows you to hands free maintain vacuum levels and switches the pump on and off. Checkout our videos on this system to get a more in-depth look at the features.
Q: Can this be used to maintain an 8 inHG pulled vacuum? (21 inHG absolute). We are looking to perform accelerated aging at high altitudes and need to maintain a 3000 meter simulated altitude for 137 days.
A: Yes, it should work for that purpose but we would like some additional details on this to make sure. Please give us a call at 281-547-0330 ext 103 to discuss this further.
Q: Is there are 220v-240v version of this for Australia?
A: We only offer this in 115V. You would need power adaptor/converter to convert 220V to 115V that you would plug the controller into.
Q: Can the switch be adjusted down anymore? Looking to get down to 29.
A: The unit comes preset to cycle on below 22 InHG and off at 25 InHG. You can adjust it in either direction as much as you want (will always have a 3 InHG differential).
Q: How do I set up the Automated Vacuum Control System?
A: Download Instruction Manual Here.
Q: What vacuum pump do you recommend?
A: We recommend the following three pumps - based on what you will be pressing you will have to decide which will work best for you:
Q: The vacuum pump fitting doesn't match the easy connect NPT parts supplied. How do I make it work?
A: You will have to remove the flared fitting that your vacuum pump comes with standard and replace it with the 1/2" or 3/8" easy connect fitting supplied with your press depending on model. Most vacuum pumps are ACME threaded which is a little different than NPT. Once you remove the standard fitting it will rethread to work with the NPT included. Watch this video on how to do that - Click Here
○ Automatically cycles vacuum pump to maintain levels
○ Connect up to 3 vacuum presses
○ Plug & Play design
○ Easily Adjustable Differential
○ Removable filter
○ Works with any 110 Volt vacuum pump
○ Mounts in any position
○ 3 Stem Plugs
○ Vacuum Filter
○ Inline Check Valve
○ 2 - 1/2" Elbows
○ Power Cord
…instead you can focus on doing what you do best.BUY NOW